Cool but sticky
in Metairie?
That’s a sizing problem.
We come from our shop on the I-12 service road in Ponchatoula, about 65 minutes away. One honest visit that finds the real cause, with the price in writing before any work starts.
Daikin Premium PartnerA/C & heatingWhere the lake meets the levee.
Metairie sits between Lake Pontchartrain and the Mississippi River levee. On a summer afternoon, pulling water out of the air is as big a job for your A/C as cooling it. A system sized only for temperature cools the house fast, shuts off, and leaves the humidity behind, so it feels cold and damp at the same time.
That’s why we start every Metairie visit with a load calculation and moisture readings, then size, seal and drain the system for the house it’s in.
About 65 minutes and 49 miles from our shop on the I-12 service road by way of I-55 and I-10.
NEARBY TOWNS WE SERVE
Pick the one
that sounds like you.
Documented from the load
calculation to start-up.
When a home inspector someday asks who installed this and when, the answer is in your file.
Free replacement quote
On-site look at the system, ductwork, electrical service and the house itself. A Manual J load calculation to ACCA standards. A written quote with your equipment options and the total price, with no high-pressure sales.
Permit coordination
Mechanical permits filed with the parish or town, and the rough-in and final inspections scheduled with the inspector. Permit fees are in the quote.
Equipment, matched
Daikin equipment, picked for the load calculation and your budget. We’re a Daikin Premium Partner. Matched outdoor and indoor units only, with the AHRI certificate in your file.
Licensed installation
Installed by Xero DMG under Louisiana Commercial Mechanical license CL.08880. All refrigerant work by EPA Section 608 certified technicians. Line set, condensate drain and electrical disconnect to code.
Commissioning
Refrigerant charge checked by superheat or subcooling, static pressure measured, airflow checked at the registers, and the temperature split confirmed against the load calculation.
Your project file
Load calculation, AHRI certificate, permit numbers, inspection sign-offs, serial numbers for warranty registration and the start-up readings. Ready if you ever sell the house.
The system is probably cooling without drying. That usually means it’s oversized or the airflow is off. A load calculation and airflow check show which.
Yes. We file the mechanical permit and schedule the inspections for you. Permit fees are in the quote.
Most home installs are done in one day. Permit timing depends on the parish or town; we file it and schedule the inspections for you.
Xero DMG, under Louisiana Commercial Mechanical license CL.08880, with Louisiana Residential Contractor license RL.890700. Refrigerant work is done by EPA Section 608 certified technicians. One contract, one team.
An oversized system short-cycles and leaves the house damp; an undersized one runs nonstop and dies early. A Manual J load calculation looks at your windows, insulation, air leaks and the Jefferson Parish climate. It goes in your project file.
Yes. Gas furnaces, heat pumps and ductless mini-splits, repaired, maintained and installed.
Check us yourself.
Restoring what
was lost.
Your comfort, your air, your home, back the way it should be.
Book in Metairie.
Tell us what the system is doing. We Answer Day or Night, and we’ll call you back to set a time.
A/C & HEATING
/hvac/A/C & Heating/hvac/ac-repair/A/C Repair/hvac/ac-replacement/Replacement/hvac/clean-check/Clean & Check + Plan/hvac/indoor-air-quality/Air Quality & Ducts
FROM THE FIELD
WHEN IT’S MORE THAN THE A/C
MOLDMold that keeps coming backWATERWater from the air handlerFIRE & SMOKESmoke pulled through the ducts
